Services/IRC
| Description | IRC (Internet Relay Chat) is a chat system. We have our own internal network, formerly used to contact administrators and discuss with other users. Even is not advertise widely, external people may join the network, so you can invite your friend. | |||
|---|---|---|---|---|
| Prerequisite | None | |||
| Account | none | IPv6 Ready | Yes | |
| Security Notes | Your messages are secured if you connect using the secure port(s), but you need to ensure the recipient uses a secure connection too ; this can be achieved using chanmode +z (see below). | |||
Access
Using an IRC Software
To connect you need and IRC client, like for example:
If you have problems seeing the modes then you probably need to upgrade your client to fix bugs parsing the protocol.
You need to configure these parameters:
- host: irc.milkypond.org
- port:
- 6680 (secure connection using SSL/TLS, recommended)
- 6667 or 6669 (because 6667 is sometimes filtered)
No password is needed to connect but you may pass your Service Account password and it will be passed to NickServ automagically.
The recommended and most secure configuration is:
- TLS connection on port 6680
- create a certificate and authenticate with CertFP (see below)
- create a service account and associate your certificate with your account
Using a Web Interface
Use the following URL:
https://irconweb.milkypond.org/
Official Channels
- #MilkyPond: main channel used to meet with other users and friends and ask general questions
- #DuckCorp: contact with DuckCorp Administrators and technical discussions
Contacting IRC Administrators
In case of problems on IRC you can find connected administrators using this command (mind the idle time):
/QUOTE STATS P
Features
Commands
You can see available commands using this command:
/QUOTE HELP
You can get help about a particular command using this command:
/QUOTE HELP <command>
The list of commands is also documented here.
Additional Commands for IRC Administrators
All special commands are listed in the Oper MOTD.
User Modes
You can see available user modes using this command:
/QUOTE HELP UMODES
Filtering Unwanted Messages
We try to ban spam and nasty people from our network but if we're not fast enough (sleeping…) you might want to take action into your own hands.
With the "Caller ID" mode (user mode +g) a user can define an access list. With this mode you will be notified when someone not in your accept list is trying to contact you, but at a reasonable rate. The person trying to contact you will get notified their messaqe has been blocked.
You can use the ACCEPT command to define your accept list.
To add someone to your list:
/QUOTE ACCEPT <nick>,<nick>,<nick>,…
That user will now be able to send messages to your client until the association is broken.
Associations break in one of the following situations: when an accepted user QUIT's (or is on the other side of a split), you QUIT, or the accepted user changes their nick. The reason why a remote user's nick change will remove them from your accept list is so that you cannot track a user after they changed their nick.
You can view you accept list at any time:
/QUOTE ACCEPT *
Removing a user from your accept list can be done with this command:
/QUOTE ACCEPT -<nick>
Channel Modes
You can see available channel modes using this command:
/QUOTE HELP CHMODES
IRC Services
To help not loose your favorite nick or channel, the IRC Services can register them so you're still in control. It also helps manage channel with a variety of tools. Look at the user introduction manual in the documentation below.
List of Services:
- ALIS: search available channels
- USERSERV: register an account
- INFOSERV: read operator news (not in use in this network, we send global announces and post to the mailing-list)
- STATSERV: few network information (not that useful)
List of Services available with an account (see USERSERV):
- NICKSERV: register nicknames
- GROUPSERV: manage group of users used in ACLs
- CHANSERV: register and manage channels
- MEMOSERV: send and receive memos from other registered users
To get help on each service commands, use the following command:
/QUOTE <service> HELP
Register an Account
To create an account first register it:
/QUOTE nickserv register <password> <email>
Then check your emails and use the provided verification command that should look like this:
/QUOTE nickserv verify register <nick> <code>
Your account will not be valid until verified.
If you change your email address you will need to revalidate it using the same process.
Secure Service Authentication (CERTFP)
You can authenticate to your service account using a password, but it is more secure to use a certificate and not too complicated to setup. The Freenode network has a good documentation for this feature.
Don't forget to select the SASL/EXTERNAL authentication method and use TLS.
The commands to associate your certificate to your account are the same as on Freenode:
- get your fingerprint with: /whois <mynick>
- add the fingerprint to your account (you need to have registered and account and by logged in): /QUOTE nickserv cert add <fpr>
Additional Services for IRC Administrators
(exact privileges depends on trust and delegation)
- OPERSERV: superadmin commands
- GLOBAL: messaging all users
Technical Details
This service is made using:
- InspIRCd
- Atheme IRC Services
- The Lounge (Web UI)
